You MUST wear protective gloves and glasses before opening the bottle.
One Shot is a professional, corrosive product — 18+. Keep the area ventilated, never mix it with other products, and always pour it into the drain.
The directions, step by step
Using a cup, remove as much water as possible from the drain, sink or toilet to be treated.
Very slowly pour One Shot directly into the drain.
Sink drains: use about 125ml initially. Allow to stand for 5 minutes.
Add 150ml of cold water, allow to stand for a further 5 minutes, then flush through.
Repeat if necessary for stubborn blockages.
Toilet and floor drains: use about 250ml and follow the same directions.
Doses at a glance
| Where | How much |
|---|---|
| Sink drains | About 125ml initially |
| Toilet and floor drains | About 250ml |
| Preventative, each drain | Around 100ml per month |
Monthly preventative maintenance
Use One Shot regularly and drains keep flowing, which saves the cost of expensive call-outs.
Add around 100ml per month to each drain. For best results, use early in the morning when the drain won't be used for a few hours.
Where you can and cannot use it
Can I use One Shot in a septic tank?
Yes. One Shot can be used with septic tanks.
Can I use One Shot on a macerator or Saniflo system?
No. Do not use One Shot on macerators or Saniflo systems.
Working out the right approach for a job? Read our guide on how to clear a blocked drain, or see how it compares with other methods in One Shot vs caustic soda.